Milwaukee Liquid Calibrator PH 4.01

€17.57

Tax included

The use of calibration, cleaning and storage fluids is essential for the proper use of your meters.
In addition to good use, the electrode also benefits by having a longer service life and working more efficiently.
To calibrate with the MA9004 calibrator buffer 230ml bottle, pour up to 1cm of calibrating liquid into a beaker. Turn on the meter, put the tip of the probe or electrode in the beaker. Then proceed to its calibration

Liquid

Calibration can be manual or automatic.
In case of manual calibration with the calibrator buffer MA9004 230ml bottle, turn on your meter, put the meter or the electrode inside the beaker, shake lightly to facilitate the reading of the buffer by the meter, and, with the help of the calibration screwdriver or of the calibration wheel (depending on the model) adjust the data on your screen to the data indicated in the buffer.
In case of automatic calibration with the MA9004 calibrator buffer 230ml bottle, follow the instructions in your meter manual. The way to calibrate will depend on each type of meter.