Black Flood Reinforced Square Pot

The geometry of the pot is practically a cube. At its base it has a series of large holes for drainage. and water absorption. And the corners are reinforced and raised off the ground about a centimeter, which allows aeration of the substrate and flood irrigation.

At sight, it is a pot with a wide and flattened constitution. Which makes it an ideal pot for cultivate autoflowering varieties that need root space to develop more branched and with volume. They are also ideal for the maintenance of mothers, since they also need amplitude in the root zone, to induce its development in width and height.

When they are placed side by side with their walls joined without leaving space between their wide edges, it is configured a network, in the form of a grid, whose sides are 4 centimeters wide. This allows access to any point of the net stepping over these double edges. Space is saved and flood irrigation is facilitated, since the base of the irrigation trays is used up to the last cm2.

To carry out this irrigation action, we recommend adding a good layer of clay to the pots at the bottom. Clay is a light and porous material that will contribute significantly to keeping the substrate aerated and not accumulate moisture after each watering.